Tesla Wall Connector bootloader bypasses the firmware downgrade ratchet
#HackerNews #Tesla #Wall #Connector #Bootloader #Firmware #Bypass #Exploit #Cybersecurity
Tesla Wall Connector bootloader bypasses the firmware downgrade ratchet
#HackerNews #Tesla #Wall #Connector #Bootloader #Firmware #Bypass #Exploit #Cybersecurity
Todoist (@todoist)
Todoist의 Claude 커넥터가 정식 출시되었다는 소식이다. Todoist와 Claude 사이를 오가며 작업을 복사·붙여넣기할 필요가 줄어들어, 팀 생산성과 작업 흐름이 개선된다고 설명한다.

You asked, and it’s finally here: Todoist’s Claude connector is live! ✨ Less tab-switching, copy-pasting your tasks between Todoist and @claudeai, and losing your train of thought, more actually getting things done. Your team (and your 47 open tabs) will thank you. (🧵1/4)
The Serial TTL connector we deserve
https://kohlschuetter.github.io/blog/posts/2026/05/07/serial-ttl-connector/
#HackerNews #SerialTTL #Connector #TechInnovation #Electronics #Design #ModernTech
Agent-Native Extensibility
이 글은 기존 플러그인 시스템과 달리 AI 에이전트가 프로젝트에 맞게 기능을 적응시키는 '에이전트-네이티브 확장성' 개념을 제안한다. 플러그인은 고정된 인터페이스를 가진 패키지인 반면, 에이전트 커넥터는 프로젝트 구조를 이해하고 필요한 파일 작성, 의존성 설치, 인증 처리, 검증까지 수행하는 자연어 기반 설치 스크립트 역할을 한다. 이를 통해 다양한 공급자를 하나의 표준 계약으로 추상화하고, 확장 기능을 투명하고 감사 가능하게 만들어 신뢰 문제를 해결한다. 이 접근법은 AI 에이전트가 코드 적응과 설치 과정을 주도하는 미래형 확장 생태계 구축에 중요한 시사점을 제공한다.
https://www.nibzard.com/agent-native
#aiagent #extensibility #plugin #connector #softwareengineering
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.