First attempt at instant astrophotography!

Bronica ETR-Si camera
Bronica Zenzanon-E II 500mm f8 lens
Bronica Tele-Converter-E 2x
Fuji Instax film back

I had to google the exposure, since the autoexposure was way overexposed, even with full exposure compensation dialled in on the prism. As you may or may not be able to tell (if you can read my hand writing) this was 1/500th at f8 (with the 2x teleconverter that was effectively f16).

#astrophotography #instantastrophotography #instantphotography #instaxastrophotography #photography #instax #instaxmini #moon #maxinggibbous #bronica #bronicaetrsi #bronicaetrs #bronicaetr #longlens
Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zenzanon100mmmacro #zenzanonmacro100mm #mediumformat #sixbyfourandahalf #bronicainstax
Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zezanon100mmmacro #zezanonmacro100mm #mediumformat #sixbyfourandahalf #bronicainstax
Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zezanon100mmmacro #zezanonmacro100mm #mediumformat #6x4.5
Bronica ETR-Si Camera
Bronica 100mm f4 Macro Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera too. This is possibly the best quality and most control options for an Instax Mini print.

The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points. On Bronica film backs, these points are metal, but on the Instax back they are plastic. My fears could be unfounded, but I am worried they are going to break.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography #macro #zezanon100mmmacro #zezanonmacro100mm #mediumformat #645
Bronica ETR-Si Camera
Bronica 50mm f2.8 Lens
Fuji Instax Mini Back

The size of a Fuji Instax Mini print is almost the same as a 6x4.5cm negative. There's a little black bar down the side of the print as 6x4.5 is slightly smaller. I believe it's possible to remove the film mask from the camera body and this will remove the black bars, but I haven't tried it yet.

The image quality is excellent. The highest I've seen so far on Instax Mini. I have full manual control over the camera. The film back is SLS 3D printed, and I bought it from a seller on eBay. It works well, but I need to use it more to get over my fear of breaking the mounting points. On Bronica film backs, these points are metal, but on the Instax back they are plastic. My fears could be unfounded, but I am worried they are going to break.

#zenzabronicaetrsi #bronicaetrsi #zenzabronica #instax #fujiinstax #instantphotography #instaxphotography #photography