#WIPWepnesday #forj
Ma #forge #gauloise en cours de construction. Les patrons des #soufflets et la base de ceux-ci. Et la boîte en chêne qui recevra la #brasque pour le foyer de forge.

My #celtic #forge under construction. The #bellows patterns and base. And the oak box that will house the clay mixture for the forge #hearth.

Out with the Kodak 3-A Folding Pocket camera: Some street art around Aveiro

My second outing with the Kodak 3-A Folding Pocket camera was just as much fun as the first test with this camera, but not as successful. From my expired film box in the cupboard I picked a roll of Lomography ISO 100 colour film, which expired in 2023.

Loading the camera was easier than the first time, I roughly know what I’m doing now. I stopped winding when I came across the ‘start’ arrow and closed the back. This time I wound forward for 20 half turns, which is the position that the Camerhack.it website suggests the film was in the right position for the first exposure. After each exposure I wound the film forward eight half turns to the next frame.

*Edit (16 February 2025): Comparing this roll of film with that taken on my first outing with this camera, two things are immediately apparent. Firstly, winding the film on by 20 half turns was too much. This left too large a leader before the first frame. Secondly, I think that I actually wound the film too far between frames, 10 half turns instead of 8. Comparing the image spacing with the first outing, I reckon that in fact 7 half turns between frames is ideal. So on the next outing I’ll try 18 half turns from the ‘Start’ marker and 7 half turns between frames.

This time I headed to Aveiro to record some street art. There’s one excellent example near the railway station, and I discovered other on the other side of the city near the Yacht Club. Actually, I had intended to go to the Yacht Club but the area was being resurfaced and I couldn’t gain access. 

As before, I left the shutter speed of the 3-A on 1/100 second and rated the film at its box speed of ISO 100. I used the app Camera Meter to judge the apertures I should be using, which for this exercise was between f16 and f22. With my four exposures in the bag I dropped my film off at the lab and within a few hours the zipped files dropped into my inbox. 

Again the images were a little ‘thin’ to my mind. Having looked at the negatives from the first outing they actually looked fine, so I didn’t adjust the exposure, but I’m wondering if I should open the aperture by one stop above the meter reading to get a better exposure. *Looking at the negatives the images are definitely murky and overexposed. In future, when I’ve made the reading I’m going to close the aperture by one stop. Hopefully, this will give a better exposed image. 

Sadly, apart from my first image the framing of the subsequent images was quite poor, and I’m not sure why. Perhaps I didn’t have the viewfinder quite level. Also, the street art near the station was framed completely wrongly. I’m going to have to go back and do that again. Lastly, I only got three frames out of the roll, and I’m not sure why. It’s a bit fiddly to get to the shutter, and I reckon that perhaps I didn’t press the shutter lever properly.

*Edits made on 16 February 2025, after examining the negatives.

If you are on Mastodon, you can now follow this blog directly. Just go to Mastodon and follow my WordPress account at @keithdevereux.wordpress.com. All new posts will be automatically updated to your timeline on Mastodon.

#122Film #Autographic #Bellows #Camera #Experimental #Film #Kodak #Panorama #Retro #Vertorama #Vintage

#celtique #diy #reconstitutionhistorique #history

Bonjour j'essaye de fabriquer une réplique de #forge #celte ou du haut #moyenage
Je cherche des infos sur le #foyer, les #soufflets et la jonction entre les deux .

Hello, I'm trying to make a replica of a #Celtic #forge or from the early #MiddleAges. I'm looking for information on the #hearth, the #bellows, and the connection between the two.

The Kodak 3-A Folding Pocket camera: An economical panoramic camera for the twenty-first century?

Over the Festive season, aside from eating and drinking far too much, I received my 120 film adapters from camerhack.it. Last week I made some film masks for the Kodak 3-A and 1-A Autographic Jr cameras, and last weekend made the first attempt to load the 3-A, which seemed to go well.

I’ve a box of various films deliberately left in the cupboard just to play with, and I loaded the 3-A with a roll of Ilford XP2 that expired in 2022. Loading a ‘real’ film, and not just the paper backing, into the 3-A was quite straightforward, though of course I was a bit nervous about winding it on too far.

I stopped winding when I came across the ‘start’ arrow and closed the back. From that point I wound forward for 17 half turns at which point I guessed that the film was in the right position for the first exposure. 

Since the weather had improved dramatically from the dull and dreary weather or last week, it was a lovely sunny day when I headed to Aveiro. From my test I knew that I only had four frames, and as this was a trial run to see if the camera was working (and that my modifications were not going to completely ruin the film) I chose simple subjects that I could guess would frame properly in the reduced film gate.

The area around the Melia Ria hotel is one of my favourite locations in Aveiro. The cube-shaped hotel is located on the edge of a large artificial lake that once formed the loading and unloading dock for a once thriving pottery factory, now Aveiro’s city hall. About ten years ago the hotel enjoyed uninterrupted views of a park and the cityscape of Aveiro, but since then there has been almost continuous development of apartment blocks, which are out of the reach of most people.

It’s good (?) for me, though, since the blocks make a lovely cityscape that come closest to allowing me to capture something like a downtown metropolis. To view my shots with the 3-A, I drew an imaginary line across the centre of the viewfinder and tilted the camera until it was as level as I could manage. Then I made sure there was plenty of space top and bottom of my subject and took the shot.

The shutter speeds of the 3-A are accurate, so far as I can tell, which is remarkable for a 100-year-old camera, but I left it on 1/100 second an rated the film at its box speed of ISO 400. I used the app Camera Meter to judge the aperture I should be using, which for this exercise was f32. With my four exposures I took two around the Melia Ria hotel and a further two of the canals in the centre of the city. 

On my way back to the railway station I dropped my films off at the lab and within a few hours the zipped directories dropped into my inbox. Opening the images, I was thrilled to bits. It actually worked! There were no scratches on the negatives and no overlapping of frames. After winding seventeen half turns for the first frames, I wound the film on with seven half turns for the second and third frames, and six half  turns for the last frame. 

The images were a little ‘thin’ to my mind, and I’m wondering if I need to open the aperture by one stop above the meter reading to get a better exposure. I find something similar when metering for the Instax Wide film with the 9×12 folding cameras, so maybe it’s something to do with the adjustments at the dawn of the twentieth century. Who knows, but I’ll test again.

At the end of the day, I was literally thrilled. There were a couple of light leaks in the first frame, which I reckon is from where I load the film, original 122 films would have had a longer leader to account for the longer film gate, but the 3-A is definitely coming out with me again, and soon (hopefully before the end of the current Shitty Camera Challenge). 

Addition: Looking at the negatives, the first image of the Melia Ria hotel is quite close to the start of the film, and shows light leaks, and after the last frame is about a further 10cm of film. Therefore, I reckon that if I make three extra half turns after the start line, or 20 half turns in total, then I should have enough space to fit four full frames on the film, with a little bit of space at the end.

If you are on Mastodon, you can now follow this blog directly. Just go to Mastodon and follow my WordPress account at @keithdevereux.wordpress.com. All new posts will be automatically updated to your timeline on Mastodon.

#Autographic #Bellows #Camera #CameraHack #Experimental #Film #FrugalFilmProject #Kodak #Retro #Shittycamerachallenge #Vintage #122Film

Using 120 film in 100-year-old folding cameras

I’ve had a number of vintage Kodak folding cameras for a while now, and back in November I added another that I’ve been after for a long time, the massive Kodak 3-A Folding Pocket camera, to the collection. (It still tickles me how a giant heavy camera like the 3-A could ever be considered as a ‘pocket’ camera.)

Soon after receiving the 3-A I finally got my act together and ordered some adapters from camerhack.it so that I could use 120 film with these cameras, since hunting down rolls of 122 or 116 film would be fruitless or expensive (or both). I have three vintage cameras that I would like to use with 120 film, the Kodak 1-A Autographic Jr, which takes 116 film, the Kodak 3-A Folding Pocket camera, which takes 122 film, and a roll film back for the KW Patent Etui, which takes 118 film.

I ordered the three sizes of adapter from camerhack.it and they arrived last week. So this past weekend I’ve had great fun preparing the cameras to use with 120 film. The first thing I needed to do with each folding camera was make a mask to cover the film gate so the films don’t curl. I’ve been studying various options and the best one seems to be to make a rectangular mask that fits over the whole of the film gate.

I measured the dimensions of the film gate and calculated the width of the space needed to overlap the edges of the 120 film by about 5mm each side. To get the dimensions right I used the paper backing from a roll of 120 film. This was probably a little too much, but I wanted to make certain that the film would run smoothly through the camera and be supported all around. The material was thin plastic from a cheap envelope, but quite sturdy. To minimise the chances of the plastic scratching the film I sanded the edges of the frame with sandpaper. I hope this will be enough. 

I checked the fit of the mask and glued it into place in the back of each camera (there’s no going back now). I also added a thin wedge of magic sponge to the space under the wind-on spool, which I hope will ensure there are no ‘fat’ rolls and the 120 film will wrap tightly around the take-up spool. This is a lesson I learned from using the Agfa Clack on the Frugal Film Project a couple of years ago. 

The final step was to calculate the number of turns I need to wind on the film to get nicely separated frames. I know that I’ll get about five frames from the 1-A, and four from the 3-A, but how many turns of the wind-on knob will I need with my cameras? Camerhack.it have a nice guide on their website for each of the adapters, but for my cameras it was a little bit off, so here is what I found. Bear in mind that this was with just the paper roll, no film included so these might be in error, but this is what I will try with the first roll, which will be purely experimental anyway.

After checking the two cameras I turned to the 118 film back. This doesn’t actually need a mask installed, it is fitted with a dark slide, but of course I need to check the number of turns. The 120 roll with adapters fitted snugly in the film back and I wound on the film until I could see the ‘start’ line in the window. I then started turning and marking the paper where I thought each frame would be. I reckon that I’ll get about seven frames out of a single roll of 120 film, but I think this is an overestimate. The first roll will certainly be interesting. 

The weather forecast for the next few days is unsettled, with rain and winds forecast, but next week hopefully I’ll be able to take these cameras out on a test run. I’m certainly looking forward to seeing the results. 

If you are on Mastodon, you can now follow this blog directly. Just go to Mastodon and follow my WordPress account at @keithdevereux.wordpress.com. All new posts will be automatically updated to your timeline on Mastodon.

#116Film #118Film #122Film #Adapters #Autographic #Bellows #Camera #CamerHack #Experimental #Film #FrugalFilmProject #Kodak #Retro #Shittycamerachallenge #Vintage

First test actual film photo from the large format. I'd hoped to have a more interesting photo but the tide was high and too rough to get to where I wanted with the intention of getting some halation effect on the film.

It's also the first lunch break I've been able to take in a long while, so it is what it is. Loving it so far and need to learn more, make some adjustments to the bellows frame as I accidentally knocked the front standard giving a little wierd dpeth of field when it should have been locked.

Oh, and developing. No more sloppy habits! clean fingers and clear dust before scanning in. 🤦

Nerdy stuff:
------------------------------------
Fomapan 200 4x5 sheet film shot at box speed
1/10
f8

Rodinal 1:50 for 10 mins @ 20c

#ishootfilm #largeformat #analoguephotography #sheetfilm #analogphotography #film #filmphotography #isleofwight #pureislandhappiness #mpp #monorail #bellows #fomapan #5x4 #rodinal #selfdeveloped