4-way splitter/switcher with ALL Outputs ISOLATED.
Active, buffered, suitable both for bass & guitar or any other instrument with similar pickups.
It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.

Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated foot-switch (+ LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variety of voltages ranging from 9V up to 24V max. Larger voltages offer you more headroom so that you can
also use it with higher line level signals.

All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.

▹ Input impedance: ~3.3MΩ
▹ Output impedance: ~330Ω
▹ Voltage required: 9-24V DC
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V
▹ Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Weight: 440gr

#dpFX #dpFXpedals #splitterpedal #boutiquepedals #handmadepedals
#handmadeeffects #basssplitter #guitarsplitter #handpaintedpedals #isolatedsplitter #splitterswitcher #switcherpedal #4waysplitter
#pedalseffects #pedalsandeffects #guitarpedals #basspedals

4-way splitter/switcher with ALL Outputs ISOLATED. Active, buffered, suitable both for bass & guitar or any other instrument with similar pickups. (detailed specs in the first comment)
#dpFX #dpFXpedals #splitterpedal #boutiquepedals #handmadepedals #handmadeeffects #basssplitter #guitarsplitter #handpaintedpedals #isolatedsplitter #splitterswitcher #switcherpedal #4waysplitter #pedalseffects #pedalsandeffects #guitarpedals #basspedals

4-way splitter with all four outputs isolated. This active, buffered, 4-way Splitter is suitable both for bass & guitar or any other instrument with similar pickups. More info/specs in first comment.

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder #pedalsandeffects

U2B. Unbalanced-to-Balanced converter (active DI Box)

This is a simple, active converter (transformerless) that takes an Unbalanced signal and converts it to Balanced while also offering an independent THRU output so that you still have the unbalanced signal available for any further use. The device is suitable for instrument level or line level signals as well and is noiseless.
A volume knob is available for the Balanced output that ranges from Mute (at min) up to unity gain (at max).

A high input impedance and low output impedance ensures that your signal will be routed to the interconnected devices without any tone loss and preserving its original fidelity even if you use long cables.
You can power the device with a DC Voltage ranging from 9V to 24V.

Please do not connect phantom power to the XLR output or it might lead to circuit damage. Although the capacitors of the XLR output canwithstand the 48V of the phantom power for a short period of time, leaving the phantom power ON for long periods can eventually cause damage.

- Input impedance: 10MΩ
- THRU Output impedance: 100Ω
- Balanced output impedance: 200Ω
- Voltage required: 9-24V DC
- Polarity: Center negative
- Current consumption: 8mA @ 9V
- Available Headroom vs Power supply: 7Vpp@9V, 10Vpp@12V, 22Vpp@24V
- Enclosure dimensions: 114x60x32mm (4.43x2.38x1.22in)
- Weight: ~170gr

#dpFX #dpFXpedals #dibox #activedi #boutiquepedals #handmadeeffects #handpaintedpedals #balancedout #unbalancedtobalanced #U2B #directinjectionbox #XLRoutput #XLRout #guitarsplitter #basssplitter #guitarpedals #basspedals #linelevel #balancedsignal #greekpedals #dpeffects

Rack Splitter/Router with FX Loop & XLR out.
This is a custom splitter/router with FX Loop that can handle signals ranging from instrument level up to higher line level.

It is equipped with 4 TS inputs, 4 TS outputs, 1 FX Loop (2xTS), a Tuner-out and a Balanced XLR-out.
By using the respective rotary switch you can select which input and which output will be active each time. (check flow chart).

It features high-impedance inputs (buffered with JFET, low noise Op Amps) that can be driven either by instruments (guitar, bass etc) or line level signals as well.
The output impedance is very low, ensuring the best interconnectivity with the rest of your gear.

The circuit is built around low noise, low distortion OP amps and is equipped with input filters in order to reject external RF interference.
It requires a typical 9V power supply and can take up to 24V (max).
The higher the voltage the larger the available headroom.

Headroom vs supply:
~6Vpp@9V
~10Vpp@12V
~16Vpp@18V~22Vpp@24V

- Input impedance: 3.3MΩ
- Output impedance: 100Ω
- Balanced output impedance: 150Ω
- Flat Frequency response on the whole span of the audio spectrum.
- Required power supply: 9-24 Volt DC
- Current draw: 12mA @ 9Volts
- Enclosure dimensions: 19" 1U 431x203x43mm
- Weight: 1055gr

#dpfx #dpfxpedals #racksplitter #splitterrouter #signalsplitter #rack1u #1urack #rackenclosure #guitarsplitter #guitarpedals #basssplitter #basspedals #inputselector #outputselector #handmadepedals #handmadeeffects #rackaudio #rackeffects #boutiquepedals #boutiqueeffects

4-way splitter with all four outputs isolated.
This is an active, buffered, 4-way Splitter suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.

Every output is equal to the input (zero volume drop) and is isolated each with a dedicated audio transformer. Each output has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.

The splitter can be powered with a variery of voltages ranging from 9V up to 18V max. Larger voltages offer you more headroom (DO NOT EXCEED 18V) so that you can also use it for line level signals.

All output jacks, including the DC-jack are placed at the top-side of the enclosure and the input jack on the right side.

▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-18V DC [Do not exceed recommended voltage! It may damage the circuit.]
▹ Polarity: Center negative
▹ Current consumption: 10mA @ 9V || 15mA @ 18V
▹ Enclosure dimensions: 120 x 95 x 35mm (4.72 x 3.74 x 1.37in)
▹ Weight: 435gr

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #isolatedsplitter #isolatedoutputs #pedalbuilder

4-way Buffered-Splitter, suitable both for bass & guitar or any other instrument with similar pickups. It features high input impedance and very low output impedance in order to preserve your tone and to not degrade your signal.
Every output is buffered and equal to the input (zero volume drop) and each one has a dedicated footswitch (and a LED) so that you can turn them ON/OFF on the fly.
The splitter can be powered with a variery of voltages ranging from 9V up to 24V max. Larger voltages offer you more headroom

▹ Input impedance: 10MΩ
▹ Output impedance: 100Ω
▹ Voltage required: 9-24V DC (Polarity: Center negative)
▹ Current consumption: 10mA @ 9V
▹ Enclosure dimensions: 120 x 95 x 35 mm

#dpFXpedals #dpFX #splitterpedal #4waysplitter #guitarsplitter
#basssplitter #boutiquepedals #handmadepedals #handpaintedpedals
#greekpedals #effectspedals #splitter #splittersthatdontsuck
#bufferedsplitter #bufferpedal #custompedals #splitterswitcher #switcherpedal #footswitchsplitter #handpainted