SEA_AllenAnother quick design for a #FreeCADfriday. I designed and 3D printed some trays for the bathroom cabinet. They are 1/3 the width of the cabinet and have and indent to match the lip of the shelf.
printerstellarProbando distintos parámetros para ahorrar tiempo y filamento al imprimir rejillas de #opengrid
Cálculos basados en una rejilla 8x8 ligera creada con este generador: https://gridfinity.perplexinglabs.com/pr/opengrid/0/0
Cambiar el extrusor a 0.8mm y quitarle capas al fondo consigue reducir el tiempo de impresión a la mitad, aunque el ahorro en filamento es poquito (7 gramos).
Probaré esta configuración con una rejilla 2x2 para comprobar si es compatible con el resto y con los accesorios #underware
¡Hola, mundo!
Comparto mi sistema actual: Bambu Lab A1, con un falso AMS (cuatro rollos de filamento montados encima para hacer cambios manuales).
Estoy con el proyecto #underware basado en #opengrid
(info aquí: https://www.youtube.com/watch?v=W33lTKwrfCI)
De momento, imprimiendo rejillas 8x8 para atornillar en la cara inferior del escritorio.
Chirayu 
73% GeekJust did the first maintenance on the H2D. That was a bit scarier and a lot more difficult than I’d expected. I had to go whinge for help from my partner to remove some of the bits. I just don’t have the grip strength ☹️
(I have the grip strength of a wet noodle)
Marcin Juszkiewicz 🙃A bunch of notes from 'which 3D printer' hunt.
1. Anycubic Kobra S1
Their slicer is closed binary fork of Orca. x86-64 only, Linux means ubuntu 24.04 package. Orca access needs installing Rinkhals (foss firmware mod).
Their multicolor box is also a dryer.
2. Bambu Lab P1S
Network access only on x86-64 via binary plugin. Bambu slicer can be used on aarch64 but no network. Orca uses that blob too.
GUADUA Y BAMBU COLOMBIAELLA, LA MISMA DE SIEMPRE
Poema al bambu guaduahttps://guaduabambucolombia.co/2026/04/19/ella-la-misma-de-siempre/
On #FreeCADfriday I designed and 3D printed an adapter to connect my shop vacuum to my planer. Simple, but satisfying.
The Oracle WokStationAnnoyingly printer 2 has started saying "external force on sensor 1" again. It happened earlier, then went away. Did a print, and then homed the printer at which point out threw the error again.
I moved the bed up and down error didn't clear. I turned it off and on and the error was gone, bed homed fine.
I've got no idea what's going on with it. #3dprinting #bambu #bambulabs #p1s
I moved the bed up and down error didn't clear. I turned it off and on and the error was gone, bed homed fine.
I've got no idea what's going on with it. #3dprinting #bambu #bambulabs #p1s
EmilyVideo of the H2C Printer detecting each of it's toolheads on initial start up