Kusuriya (kk7hut)Im 75% through my first print with a beacon probe on Hulk, my voron 2.4. so far im impressed especially with beacon tap
Trey FordhamWell, somehow the cable in my wiring harness snapped. That will definitely be the reason that my heater hasn’t been heating at all. #voron24
amdFirst print from Galaxy the 
2.4!
It all seems to be working properly and is incredibly quiet.
🧵15/
Laus🐜
Vielleicht spendiere ich meinem neuen Voron mal eine Nozzle bzw. gleich ein ganz neues moderneres Hotend. Was schmeißt man denn heutzutage so in einen Stealthburner? Empfehlungen gerne. #Voron #Voron24 #3DPrinting
食 Shoku the UmbreonPrinting the carbon basket lid. I wasn't going to bother, but I decided to swap colors when I got to the detail section. So glad I did, this looks sick AF. #voron #voron24 #nevermore #stealthmax
Nevermore filter fan configuration ✅
HEPA exhaust fan configuration ✅
Hotend jam cleared ✅
Extrusion rate calibration ✅
Broken enclosure fan replacement ✅
PEI bed cleaning and texturing ✅
We gettin real close now.
#3dprinting #voron #voron24 #klipper
Endstop verification ✅
Inductive probe verification ✅
A/B servo test ✅
Z0-Z3 servo test ✅
Z pin location ✅
Fan check ✅
Hotend test ✅
Heated bed test ✅
PID tuning ✅
Quad gantry leveling ✅
Bed mesh calculation ✅
Team, we almost there.
#3dprinting #voron #voron24 #klipper
After **WEEKS** of inconsistent z heights on my #voron2, a #voron24, I finally sat down and decided to check out what was happening. As it turned out replacing my entire #klipper config to the stock FYSETC didn't help. Playing around with my klicky and making sure that was perfect didn't make a difference. What did matter was the fact that my nozzle had about a millimeter of play up and down which completely ruined all of my Z homing. Tightened up all parts of the hotend and now we're gold.
lee smiths workshopMy custom self sourced Voron 1.8 3d printer
