USDX stablecoin depegged and after few hours still hasn't recovered! 🚨

Liquidations, stalled redemptions, and vault risks are piling up. What triggered the collapse - and can it be fixed? We break it down here: https://auriccrypto.com/stable/usdx-stablecoin-faces-major-peg-loss-protocols-launch-liquidations/

#Stablecoin #USDX #Dollar #Crash

USDX Stablecoin Faces Major Peg Loss, Protocols Launch Liquidations

The synthetic stablecoin USDX has sharply depegged from its intended $1 value, briefly dropping below $0.4 earlier today. The price partially recovered to as

Auric Crypto News

2/2

Based on the hard work of Adam, K6ARK I designed a PCB which does all the work of the connections and designed a case for it.

I think it looks like a Turret from the game Portal, hence its name.

https://shop.g7ufo.radio/products/assembled-g7ufo-turret-mini-microphone-for-qmx-trusdx-usdx-fx-4cr-zbitx-kx2-and-kx3

#Elecraft #KX2 #KX3 #QRPLabs #QMX #truSDX #uSDX #FX4CR #zBitx

Reading uSDX and BitBanger firmware code to figure out the shape of the signal fed into the RF amplifier. It’s a square, but what's the voltage range?

They control “SI5351 PLL phase through tiny frequency changes” and “PA Power through PWM on the key-shaping circuit”, says PE1NNZ. Does that suggest for CW the CLK frequency and duty cycle are stable and I can concentrate on PB2's PWM thumb on the gate of the switch? https://github.com/threeme3/usdx #truSDX #uSDX #RFBitBanger #OpenResearchInstitute

GitHub - threeme3/usdx: Simple and experimental (class-E driven) SSB transceiver.

Simple and experimental (class-E driven) SSB transceiver. - threeme3/usdx

GitHub
@KI5SMN @k2za @OpenResearchIns

But if the #RFBitBanger had a commutating mixer then the method that the #uSDX uses to demodulate #SSB, which is the phasing method using the Hilbert transform, could be used. The main problem with the #uSDX I see is that the noise level from this method without any sort of manual or automatic #gain control seems to be quite noisy (S5/S6 noise floor). ...

@KI5SMN @k2za @OpenResearchIns

The major difference between the #uSDX and the ##FST3253 or similar commutating quadrature demodulator rather than a single phase demodulator. I decided not to use such a commutating demodulator because it requires a high speed analog switcher which is not necessarily easy to find in readily available parts...

@KI5SMN @k2za @OpenResearchIns

Dr. Marks writes:

I've looked plenty at the uSDX source code and it is quite possible to add something like #SCAMP to the #uSDX. The SCAMP demodulator would have filters for both in phase and quadrature phase and then select the sideband by adding or subtracting the two filters. It might be easier to port the #RFBitBanger source code to the uSDX hardware than adapt the uSDX source code to SCAMP...

#USDX owners DX weekends with #9M4CPJ JOSRAC Batu Pahat, Johor, Malaysia

https://journal.robbi.my/posts/230801065004/

μSDX OWNERS DX WEEKENDS 🇲🇾 | Journal.robbi.my

Malaysian uSDX Owner Weekend 2023 with 9M4CPJ | Poster design by 9W2NSP Assalamualaikum and hello guys! Today, I’d like to share something related to amateur radio. A few days ago, I participated in an event called the Malaysian uSDX Owner Weekend 2023, which took place from the 28th to the 30th of July, 2023. This is an indie event organized by ham radio enthusiasts around Malaysia. The theme was set as the “Outing DXing Weekend,” during which HAM operators are encouraged to go portable by camping or engaging in other outdoor activities while operating QRP radios.

Not too bad from my DIY (tr)SDX at 200mw on a 20m DIY vertical at zero metres height overnight!
#HamRadio #WSPR #usdx #(tr)USDX #QRP #ham #radio
A heartwarming message my 10 years old son left for me in my #Winlink inbox. He is doing his karate training, while I am waiting for him in the parking lot, in my car, with my antenna on top and #uSDX and laptop on my knees.
He says: Hi, Dad! You might see this message when you will be talking to your friends. Well... How is it going? With love, your son, Victor.
So, my dear ham friends, I hope we all agree it's going great!
Not bad for my kit (tr)usdx at 400mw on 20metres WSPR in the last hour! #hamradio #radio #WSPR #trusdx #usdx