Skipper appDo you need digital load switching on your boat? Well, #SKipperApp have you covered! This device is #SensESP #SignalK compatible device that can control your lights from your phone, tablet, or #RaspberryPi. The device connects to #SignalK via WiFi and has a very fast response.
Jan Dytrych🇨🇿🇺🇦Dneska jsem to vzal pár kilometrů po proudu do veřejného přístaviště. Jen tak na bubláka. Upravil jsem si zobrazení dat ve @skipperapp a opravil chybku v počítání motohodin na pravém motoru. Pěkný večer 🙂👌🛥 @sunseeker27 #SignalK #SensESP #Boating #Labe
Made T-RelayS3 program to control 6 relays via #SignalK. Used #SensESP by @mairas and tested it by running @skipperapp, it works! 🚤 
Today I got #SensESP running on #ESP32-S3! The board is T-Relay from #lilygo and it works after about one hour of code thinkering! Used @skipperapp to control and test it, found few bugs and fixed them! I'm happy with result! 👌 It will get installed in @sunseeker27 soon! 🛥
Yesterday evening I was able to get AIS working over the WiFi, it basically reads #NMEA0183 data via UART and sends them via UDP to server. Now I need to do some power source as it need to be powered by boat 12V power system. Here is dAISy HAT at the top of ESP32 One, few HW hacks required and Serial2 configuration of HAT had to be enabled, but it works! #Boating #SignalK #SensESP
#SmartGauge has been tested on the water! Everything works just fine, even the alarms are working, a friend of mine is very happy with it. #SignalK #SensESP #AvaloniaUI #RaspberryPi
My boat is currently out of the water as we have winter season here. My boat system doesn't have a winter break, it's guarding my boat 24/7, sending all the telemetry to my server. My server keeps me posted about any issues. The purple device in the picture is SH-ESP32 with Engine HAT by @mairas. This little guy is measuring temperatures, reading engine RPM and reading batteries' voltage (very important). #Boating #SignalK #SensESP #esp32 @sunseeker27
