Ne manquez pas le webinar exclusif de Rudder, sponsor Platinum de DEVOPS REX !

Vous voulez automatiser la conformité de vos systèmes de sécurité aux benchmarks CIS, de l’audit à la remédiation ? Rudder vous invite à découvrir Policy and Benchmark Compliance, sa nouvelle solution innovante.

En exclusivité : un tour d’horizon des nouveautés de Rudder 9.0.

Rendez-vous le 20 novembre à 11h - Inscriptions : https://app.livestorm.co/rudder/conformite-cis-auditer-cest-bien-remedier-cest-mieux

#rudder #devopsrex

Glider flight controls - rudder pedals and cables.

The rudder pedals pivot at the bottom and pull on steel cable that runs along the fuselage sides, in plastic tube jackets, all the way back to the rudder. (This steel cable can handle about 1,000 pounds before failing. My legs will never generate that much force.)

Note the "S" tube on the sides of the pedals. When pedal position is adjusted for different height pilots, the S tubes mean that the rudders maintain the same orientation, and the steel cable is unitary...one length. Simple, yet effective.

(The seat/floor pan is not present in this photo.)

#AvGeek #Aviation #ElectricAircraft #ExperimentalAviation #Homebuilt #Glider #DIY #Rudder #Cable #Steel

Do the rudder and elevator interfere with each other at the extremes of their movement?

I think I have a little bit more sanding to do because I was able to increase the rudder deflection a little bit. Now it can get very close to the elevator.

#AvGeek #Aviation #ElectricAircraft #ExperimentalAviation #Homebuilt #Glider #DIY #Drag #Aerodynamics #CarbonFiber #Rudder #Elevator #Interference

So, after more than 2 years on it, we're almost at the point where #rudder is ported to #scala3 🎉🎉🎉

Rudder is an old beast. 15y old. With lib from that era like (quite fabulous in retrospective) #liftweb by @dpp, XML literals, lib using macro that won't ever be ported to Scala 3, etc.

And Rudder has a very peculiar (self imposed) constraint on branch support, where we need to easily switch to and evolve bra ches 2y old, and upmerge changes.

And still, with the help of some very talented people, it's happening. With regular update to include syntax changes, prepare the code base, check things run in the future version... Without any impact on the release cycle if the product (until now! Still time to bork everything!)

It was an extremely frustrating experience that could have been made easier without the Scala 3.0 big bang but with more iterative small changes like there is in new versions ("the last time syntax will change and books will be written", my ass).

But still, the compat layer allowing to use #scala 2 libs in #scaka3, and the migration tools, are marvels.

More Seacocks, an "underwater" tour: DIY Boat Refit Progress 4

https://cuddly.tube/videos/watch/ced2e2aa-8a70-4114-9555-54cd410b3e59

@victorhery @rudderio

#Rudder #Compliance hey, félicitations ! Ça fait effectivement plaisir à voir :)

Wheelhouse 2, The Amerigo Vespucci from Italy, Visits Los Angeles

https://welchwrite.com/blog/2024/07/12/wheelhouse-2-the-amerigo-vespucci-from-italy-visits-los-angeles-photography/

https://pixelfed.social/i/web/post/717471516564209243

#wheelhouse #rudder #ship #tallship #italy #italian #tour #losangeles #california #worldtour #italia #rigging #navy