Was man halt so für Aufgaben bekommt wenn man EDV/IT-Beauftragter der #Feuerwehr ist.

Eigene Cloudlösung, Schließanlage und so #Gedöns sind ja unlängst umgesetzt. #Datensicherheit ist auch schon lange kein reines Wort mehr.
Die hauseigene "#BMA" mit #RaspberryMatic und #Divera247 war jetzt auch kein so großes Hexenwerk und funktioniert, hat aber scheinbar zu neuen Ideen geführt.
Denn jetzt wurden die Begehrlichkeit (und Notwendigkeit) geweckt und man wolle den Bauhof (nen Klacks) und am Besten noch den Kindergarten auch damit ausrüsten.
Findet die Gemeinde grundsätzlich auch voll gut, ist nur zu teuer (klar jeder Melder kostet 60€).

#Idee der Führung:
Der Kindergarten hat doch bereits ne Anlage die ständig Alarm schlägt, quasi ne BMA ohne an die #Leitstelle angeschlossen zu sein, da könne man doch bestimmt etwas abgreifen.

Und ich darf mir nun Gedanken machen wie das umzusetzen ist.
Ich stelle hier mal kurz die Behauptung auf:
Technisch möglich aber der Hersteller wird das nicht wollen.

#Nerd #IT #EDV #FF #Ehrenamt #BOS #Blaulicht

OK, #homematic sucks a bit as it needs a radio receiver and my #raspberrymatic VM cannot hot-swap to another hardware host when one cluster node fails. Even migrating is complicated.
Are there any #thermostat devices available that can trigger electric heating and connect via WiFi?
My intention is that heating needs to work even if my home server fails and I want it to be migrateable from one cluster node to another.
Für all diejenigen, die noch kein Update von RaspberryMatic zu OpenCCU gemacht haben: Das automatische Update geht da nicht. Daher einmal auf GitHub die richtige Version herunterladen und dann als ZIP hochladen. Danach läuft das Update durch. Kann so 10-15 Minuten dauern. Aber dann läufts! 😉 #RaspberryMatic #OpenCCU #SmartHome #Automation

Das #NUT-Plugin von #OMV fährt bei festgelegten Batteriestand der #USV den Homeserver herunter.

Aber insbesondere meine #CCU3 #RaspberryMatic-#HmIP-Zentrale verkraftet Stromverlust sehr schlecht und bekommt per se vom Batteriestand der USV nichts mit.

Also folgendes gemacht:

1/2

After two months of hard work: Just released the new latest #RaspberryMatic 3.83.6.20250824 version with lots of improvements and enhancements. Grab and install it to get your #homematicIP #IoT gear properly maintained via a slim #CloudFree #CCU #smarthome gateway 🏠.

https://github.com/jens-maus/RaspberryMatic/releases/tag/3.83.6.20250824

Release RaspberryMatic 3.83.6.20250824 · jens-maus/RaspberryMatic

This is release 3.83.6.20250824 of RaspberryMatic which is a maintenance release with the following bugfixes and feature changes: Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs...

GitHub

It's time for a new major release: #RaspberryMatic 3.83.6.20250705 out now with full compatibility to 3.83.6 #CCU3 firmware and full 64bit compatibility ahead. Update your #homematicIP #IoT environment now for maintaining a slim #CloudFree #CCU #smarthome gateway 🏠.

https://github.com/jens-maus/RaspberryMatic/releases/tag/3.83.6.20250705

Release RaspberryMatic 3.83.6.20250705 · jens-maus/RaspberryMatic

This is release 3.83.6.20250705 of RaspberryMatic which is a major release with the following bugfixes and feature changes: Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Disku...

GitHub
CUxD 2.13 - HomeMatic-Forum / FHZ-Forum

Just released a new major #RaspberryMatic version (3.81.5.20250326). Full compatibility with 3.81.5 #CCU3 firmware released by #eQ3, lots of important bug fixes, operating system updates and new great features. Install it now and run your #homematicIP #IoT gateway with it for a smoother and #CloudFree #CCU #smarthome 🏠

https://github.com/jens-maus/RaspberryMatic/releases/tag/3.81.5.20250326

Release RaspberryMatic 3.81.5.20250326 · jens-maus/RaspberryMatic

This is release 3.81.5.20250326 of RaspberryMatic which is a major release with the following bugfixes and feature changes: Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Disku...

GitHub
Finally released a new #RaspberryMatic version (3.79.6.20250220). Comes with lots of important bug fixes and some new features. Grab it and power your #CloudFree #CCU #IoT hub with it so that all your #homematicIP IoT gear runs more smoothly in your 🏠 #smarthome. https://github.com/jens-maus/RaspberryMatic/releases/tag/3.79.6.20250220
Release RaspberryMatic 3.79.6.20250220 · jens-maus/RaspberryMatic

This is release 3.79.6.20250220 of RaspberryMatic which is a bugfix release with the following bugfixes and feature changes: Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Disk...

GitHub

Heute war mein Spendentag an #foss Software, die ich regelmäßig nutze. Ich bevorzuge zwei mal im Jahr einen festen Betrag zu spenden.
#homeassistant werde ich wohl durch Kauf ihrer Hardware unterstützen.

Dabei waren auch zwei Homeassistent-Addons vertreten.

Am nächsten Termin versuche ich dann auch andere Projekte zu unterstützen.

#jellyfin #libreelec #keepassxc #raspberrymatic #grapheneos #thunderbird #pihole #wgtunnel