One of my favorite setups for my "Ham on a Bike portable activities. @qrplabs #QCX Mini, #RadioadventureGearPaddle #SonyAudioRecorder @talentcelltech Battery @Tuftelndotnet Linked EFHW Antenna 17' RG316 coax. Only thing missing is throw line and Arborist weight
In the words of "Laurel and Hardy" ... Well, here's another nice mess you've gotten me into". The perils and fun of #AmateurRadio #HamRadio @qrplabs #QCX @QCXMini #QRPRadio #QRP
I was asked by @saahbs , who developed the #CWMouse paddle to take his CW Mouse QRP Labs QCX / QMX Minis NEW COVER for a test drive. I've made it part of my minimal #QRP setup with my #QCX Mini. I like to call it THE COVER 2 for QCX Mini. It is rugged, made from quality 3D printed material with magnets that give a tight fit to the top of the QCX/QMX QRP Labs case that converts to a steady stand. Here are a few pictures More to come in BLOG review in a few days. See it https://cwmouse.com/

Just playing with QRP labs radios today. Vertical MC-750, 3-4W and 20m got a good reach even the sun is throwing tantrums.

First time listened the QMX SSB and it sounds really nice!

#qrp #qrplabs #qmx #qcx #mc750 #chelegance #hamradio #amateurradio

These ingredients produced a great #FT8 / CW #MorseCode #pota #Parksontheair meal on 40/20 meters. This activation was WELL DONE! @qrplabs #QDX #QCX #PutikeegMiniStraightkey #PutikeegKey #HamRadio
Today's ingredients for a #POTA #parksontheair #FT4 #FT8 CW #MorseCode recipe. Looks like the oven might be overheating a little. Doesn't matter. We'll finish with a yummy and tasty morning activation. #AmateurRadio #Hamradio @qrplabs #QDX #QCX @panasonic #Toughpad

AGCW QRP Contest 08.03.2025 (next Saturday)

the contest will take place on many bands 10/15/20/40/80 and from 14:00 to 20:00 UTC. There should be the possibility for every OM to make a few QSO's. Every log, no matter how small, is very welcome.

All details about rules and suitable log programs can be found here

https://contest.agcw.de/qrpc/


Have fun and good luck !

73 de DK3DUA
Tom

#hamradio #qrp #contest #QCX #QMX #KX2 #KX3 #K2

AGCW QRPC

AGCW QRPC

3D Printed stand for QCX/QMX

YouTube

QCXmini stand by colinsk on Thingiverse: https://thingiverse.com/thing:5352717

I had a friend print this for me, I use it on my
@qrplabs
#QMX and #QCX rigs.
#amateurradio #fieldradio #cw #qrp

QCXmini stand by colinsk

I have been using the high quality settings and slowing the first layer down to 15mm/sec. This helps the first layer from getting pulled around. There is a round over on the bed side and it will hide any slight elephant foot you make so a raft is not needed.Two are needed for the mini. It does not require unplugging anything to install or remove. It will hold the mini in three positions. a low angle for use on a tabletop, a high angle for use while sitting and upright for shelf use.There are three small hooks that you can use to hang over an edge to keep from sliding during a button push. One for each position.

Thingiverse

I shared my VHF station with a second operator and we worked in slots of 30 to 45 min each. While she was contesting on 2m, I did a bit of #POTA as our little hill in Berlin is not only good for VHF but also has the reference #DE0315. Using the #QCX-mini and a small #HF-P1 vertical I made 15 contacts on #20m #CW including one US station.

So quite a successful #hamradio #amateurradio #amateurfunk weekend with 36 + 15 contacts.