#pin #pins #cats #koty #catsofpixelfed #catsoffedi #kitku #gadgets
A while back I got a new digital 'scope. The one I'd been using was okay, but only 8-bit and had some other limitations. The vertical resolution was actually starting to make it difficult to get accurate-enough readings of some things I was working with.
The new one is 12-bit. That is likely to be better than I will ever need. I'm happy with it. Being several years newer (and a different brand) it brings some new #features to the table.
One is that you can use it as a digital logic analyzer - it can sample a whole lot of inputs (rather than just 4 analog channels) quickly if it only has to tell on from off. But you have to get a whole lot of #signals into the #scope before you can do that, so you need a #connector with a lot of pins/signals.
You could use something standard for this type of application (which is still going to be a limited-audience part), or a custom thing, but those options are expensive. So instead, if you're the manufacturer, you find a common (and therefore #cheap) #connector with lots of #pins, and you re-use that. Done and dusted!
They picked ... the HDMI connector. It's there at the bottom of the middle of the control panel. And in the manual is the prominent (not) warning:
> WARNING: Non-standard HDMI interface, Siglent device ONLY, or you will damage your device.
Yes, if you plug anything HDMI-related into this obvious #HDMI port, you will cause damage to your 'scope, or your other device.
Jochem en de Efteling-pins.
Jochem mag al sinds 2008 pins ontwerpen voor de Efteling en is ondertussen ook alweer bezig met toekomstige pins. Natuurlijk wilde hij ook nog even op de foto.
Mensen van “kantoor” krijg ik niet vaak de kans om vast te leggen, dus extra leuk dat dit moment er toch even was. En dan ook nog in zo’n prachtige zaal!!
#Efteling #Pins #EftelingPins #Pinverzameling #Pinbeurs #EftelingVerzamelaars #Themeparks #ThemeparkFans #Pretpark #PretparkFans #EftelingFans #Col…
Working on my end of month newsletter for the patreon, including photos of all the things I made for the con suddenly at the last minute- (I always have ideas at the last minute - WHY) - like these these tiny wooden art jars that were made into pins + magnets :)
Pluralistic: A free, open visual identity for enshittification (24 Apr 2026)
https://fed.brid.gy/r/https://pluralistic.net/2026/04/24/poop-emoji-plus-plus/
I messed up and pre-packed a bunch of backerkit orders that I already shipped lol so the next 7 people who order JUST a tiny robots pin set from my shop will get a free matching sticker set! No time limit, I just got 7 of these sitting here all packed and waiting now: https://shop.aimeecozza.com/product/tiny-robots-pin-set/

Tiny silver robots to fill up the spaces on your pin board, be made into earrings, or anything else. You'll get 5 robots, no more than .5" in size. Each is silver with black enamel fill and has 1 post with a rubber backing. Mac - Mac speaks in only beeps and boops. Cass - Cass really enjoys retro music. 80s, mostly. IO - A tiny plucky little dude whose antennae doubles as a party hat. Always down to clown. Punk - Sweet beats? Punk can make those. As long as they're cyclical patterns. Critter - Critter claims that it is from outerspace. Not sure if I believe it, though.