So it turns out #FreeBSD via #PXE only uses #TFTP for the initial boot but expects `/boot/lua/loader.lua` to be loaded via #NFS, the root of which it expects to get via #DHCP but #dnsmasq won't supply this when in proxy mode.

Joy.

So neither .iso nor .img will boot #FreeBSD off of a USB thumbdrive or another, ventoy or raw.
The #ThinkCentre M73 freezes at installer boot screen.

#PXE it is. Weirdly #dnsmasq changes the boot file (#wireshark showed me it appends `.0`) in the proxy ACK, but not in the original offer. Whatever, `cp`.

But now it seems like the file size is erroneously transfered, and therefore the #TFTP transfer gleefully halts mid-file.

At least now it's stalled at a blinking cursor instead of freezing.

Sigh...

#homelab #selfhosting #bsd

🎉 In the latest episode of "Things No One Asked For", our hero bravely attempts to boot #Linux #diskless using #ZFS, #iSCSI, and #PXE just to avoid messing with Windows. Because clearly, the only logical solution to not wanting to clutter your #gaming PC with toolchains is to summon the unholy trinity of ancient network boot protocols. 🥳 Honestly, why not just run Doom on your fridge while you're at it? 😂
https://aniket.foo/posts/20260505-netboot/ #HackerNews #ngated
Diskless Linux boot using ZFS, iSCSI & PXE

Diskless Linux Boot

Syncopated Pandemonium
Diskless Linux boot using ZFS, iSCSI & PXE

Diskless Linux Boot

Syncopated Pandemonium
#PXE over #DSL wäre auch irgendwie eine Fancy Idee :3

I picked up an #EMC #Celerra / #VNX Control Station with drive and an EMC VNX 5500 without vault drives yesterday.

The control station seems to be fully functional. The drive is happy and has been imaged (to file and ZFS zvol for me to poke at).

One VNX storage processor is halting with a “DIMM 1” error on boot.

The good storage processor is currently recovering from some #FLARE OS / vault drives I had.

The guy I bought the goodies from has another VNX 5500 that he is going to pull a DIMM from and swap for the bad DIMM.

I think that I might be able to use the control station to recover the #DART OS for Data Movers (X-Blades) I have.

All the reading that I’ve done suggests that the Data Mover can net (#PXE) boot from the control station and do an OS install to boot / control LUNs.

Wie viele #Admins braucht man zum Deployment von 150 Client-PCs an einem Vormittag? Viel zu viele! Dieser Beitrag thematisiert den Massenrollout mit #PXE und #FAI, viel Spaß beim Lesen!

https://blog.jakobs.systems/blog/20260224-fai-linux-rollout/

#Deployment #GitOps #Automatisieren #Linux #Debian #Operations #Prozess #Reifegrad

Well... I have setup my demo lab on cheap mini pc and mikrotik router without much preparation in maybe 2 hours.

now tune the scripts, maybe throw in terraform/tofu instead of semi-manual vm creation (talos is installed automatically via PXE)

#talos #kubernetes #k8s #cilium #pxe #proxmox #nerd

I have a Dell Wyse 3040 thin client I'm trying to PXE boot with a iSCSI root volume.

I can see the DHCP request at power up, but I never see it make the tftp request for the file using the options in the response.

Anybody else had any luck?

#homelab #dhcp #pxe

Wie @osos_austria 150 #Linux Notebooks innerhalb von kürzester Zeit installiert und
später aktuell hält:
https://linux-bildung.at/2026/01/geraeteinitiative-refurbed-geraete/

#Debian #FOG #PXE #Ansible #SuS #LuL #Schule

Geräteinitiative – refurbed Geräte – Linux in der Schule