Beta Update -
Build, Tune, Explore with OpenWebRX+
by Richard Murnane
https://pragprog.com/titles/rmwebrx/build-tune-explore-with-openwebrx/

Web-Connected Software-Defined Radio Made Simple!
B3.0 Release Notes:
* The book is content complete and headed to production for copy edit and layout.

(Already purchased? Check your email for a download link.)
#SoftwareDefinedRadio #SDR #OpenWebRX + #RaspberryPiProjects #OpenWebRXPlus #AirwaveExplorers

@kr1st @HopelessDemigod

yup, #openwebrxplus is pretty remarkable. I run it on a 4GB Pi 400 with just an SD card for storage.

Project Details:

https://fms.komkon.org/OWRX/

OG #OpenWebRx is awesome, #openwebrxplus is whole lotta digital decoding icing on the top.

OpenWebRX+ Home Page

My AirSPY HF+ installation is working again under OpenWebRX+ v1.2.61 after I followed the instructions at https://groups.io/g/openwebrx/topic/103545886 to change /etc/udev/rules.d/52-airspyhf.rules

The upstream issue is https://github.com/airspy/airspyhf/issues/46 and open for quite a long time, udev rules appear to be hard to get right portably.

now some hashtags in the hope I can find this again if I need to find it

#openwebrx #openwebrxplus #airspy #airspyhf #udev #sdr

OpenWebRX Plus, Rasberry Pi, Airspy HF

Looking forward to monitoring a scheduled #RTTY QSO. #W8FSA 146.92 PL100 repeater in Ypsilanti MI (St. Joes), should be reachable from Ann Arbor and the western Detroit suburbs. Planned time is 400p local on 2023-12-26, 2100 UTC.

https://www.repeaterbook.com/repeaters/details.php?state_id=26&ID=138

Al #K8WXQ is leading the way, and I'm hoping to decode ("read the mail") with #OpenWebRXPlus . I'll try to grab a recording of at least part of it.

Thanks to #W8FSA for the use of this repeater for digital modes!

New to me, a Hermes-Lite 2 SDR. Thanks to #W8TAM for the loaner. I promised I would write up my findings.

First plan, set it up as a receiver under OpenWebRX+ following the discussion on the wiki at https://github.com/jketterl/openwebrx/wiki/HPSDR-(including-Hermes-Lite-2)-device-notes

There's a Pi 5 on its way as well, so maybe everything eventually lands on that. Until then I'll use my Pi 400 which already has OpenWebRX+ running.

First antenna for this (receive only!!!) is my Youloop.

Transmit follows later.

#hermeslite2 #sdr #hpsdr #openwebrxplus

HPSDR (including Hermes Lite 2) device notes

Open source, multi-user SDR receiver software with a web interface - jketterl/openwebrx

GitHub