E190 1:400 - SLA 2
The Embraer E190 is a sleek, narrow-body twinjet known for its comfortable 2-2 seating configuration, optimizing passenger flow. Its high aspect ratio wing and efficient GE CF34-10E engines provide excellent performance for regional routes.
Someone gave me a suggestion to upload this, E1900, on Cults, so I did. This might make you confused, the attached pictures above are with 1:600, the one on the right is the whole model and the one on the left is the one where the two wings are separate but one whole part. The file that you will download later is with 1:400 and has never been printed before, the wings are split in two, the right and left, this I did because the results are better especially for the print, and this has been done on other models before. This model was printed using the Anycubic Photon Mono printer, hope you like it, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
🆕 Rosenbauer New Panther 8x8 (Short Canon) 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3583825
💡 Designed by @Herisuprapto
@cults3d #modelkit #shopnow #flightmodel #modelbuilding
Rosenbauer New Panther 8x8 (Short Canon) 1:500 - SLA 2
The Rosenbauer New Panther 8x8 is a high-performance airport fire truck built for maximum speed, stability, and off-road capability. Its powerful engine setup and advanced suspension let it handle extreme conditions while carrying a full load of firefighting equipment. The sleek, modern cab design offers excellent visibility and integrates the latest safety and control systems for rapid emergency response.
This time is GSE, a pair of Rosenbauer New Panther 8x8 1/500 fire trucks for resin printer, printed at a 45 degree angle, the original scale size is 1/500, can be converted to 1/400 by 125%. Hope you guys like them.
Short video link on how this truck was printed:
https://youtu.be/jyQM-VcOy2I
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
I painted up the Space Marine captain in Terminator armour from issue one of Combat Patrol magazine as a Raptor chapter captain. (yet to add a Raptor decal to the pouldron). Not bad for four hours work if I do say so myself.
#HobbyLife #MiniaturePainting #TabletopWargaming #ModelBuilding #ModelPainting #Wargaming #WarHammer40K #SpaceMarines #GW #GamesWorkshop #40K #CombatPatrolMagazine #TabletopGaming
Heri_3d
Fall Guy
Quadruvium Club - Reports
Goudomrand
Plastic Model Robot
SydneyJim
