Heri_3d4d ago

✈️ Embraer ERJ145 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by @Herisuprapto

@cults3d #diecastcars #3dprinted #planegeek #makersmovement

Embraer ERJ145 1:500 - SLA 2

The Embraer ERJ145 is a slender, low-wing regional jet known for its long, narrow fuselage and distinctive 1–2 seating layout. Its twin rear-mounted engines and T-tail give it a clean, streamlined profile built for efficient short- to medium-range routes. The aircraft’s crisp panel lines, pointed nose, and balanced proportions make it instantly recognizable among regional jets. ERJ 145 1/500 version with panel lines and two wings separated. And here is the previous version, https://cults3d.com/en/3d-model/architecture/embraer-erj145-1-500-sla. You can see how I printed it and its supports through this link, https://www.youtube.com/watch?v=aC8_9qfDehI, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Andrew Lewis WorkshopFeb 28

It's past 8 o'clock. Do you know if your children are inventing stuff?

https://www.etsy.com/uk/listing/1432948674/kids-inventing-stuff-metal-sign-funny

#makingmemories #making #kids #kidsactivities #familytime #family #crafts #crafting #makersgonnamake #makersmovement #makercommunity

Heri_3dFeb 24

✈️ B777-200 1:1000 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:60403
💡 Designed by @Herisuprapto

@cults3d #diecastcars #3dprinted #planegeek #makersmovement

B777-200 1:1000 - FDM

The Boeing 777-200 is a long-range, wide-body twinjet, notable for being the first commercial aircraft entirely designed using Computer-Aided Design (CAD) techniques. Its impressive scale is matched by its high-bypass turbofan engines, which are among the most powerful ever produced for an airliner, enabling its significant global reach. I use Cura as my favorite slicing software, and here I will explain the process of assembling that I did to make this: import from file number 1 to 6 at a time, specifically number 1 make the infill to 100% and the other is 10%. print number 7 which is multiplied to 5 times. print number 8 which is multiplied to 3 times. clean the print, try first before gluing it. cut the parts as shown in the picture above. to adjust the size of the rear wheel using sandpaper. then the assembly sequence is in the black-and-white picture attachment. Hopefully the above explanation helps you, feel free if you have questions and suggestions, thank you. https://instagram.com/heri_3d?igshid=1pfif1u1842r Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Heri_3dFeb 10

✈️ Antonov An-12BP 1:500 - FDM • 3D files
➡️ Download 3D print model: https://cults3d.com/:326165
💡 Designed by heri_3d

@cults3d #diecastcars #3dprinted #planegeek #makersmovement

Antonov An-12BP 1:500 - FDM

The Antonov An-12BP is a rugged, four-engine, high-wing turboprop freighter, designed for tactical airlift with a formidable 20,000 kg payload capacity. It's essentially the Soviet analog to the C-130 Hercules, featuring a large aft cargo door for accommodating oversized freight and the ability to operate reliably from unprepared airstrips, making it a true workhorse in challenging environments. Another aircraft model from Antonov, this model was made upon request. Inside there are two variants, the first without a cargo door, and with a rear cargo door that can be removed. I hope you like it, happy printing. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Heri_3dJan 26

✈️ B727-200 - with and without winglets 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:640490
💡 Designed by heri_3d

@cults3d #diecastcars #3dprinted #planegeek #makersmovement

B727-200 - with and without winglets 1:500 - FDM

The B727-200 is an iconic trijet airliner, easily recognizable by its T-tail configuration and three rear-mounted turbofan engines (two on the fuselage sides and one center-line fed via an S-duct). Its key design features include swept wings and a built-in airstair below the rear engine, allowing for independent operations at airports with minimal ground support equipment. B727-200 - with and without winglets 1:500 FDM Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
Heri_3dDec 31

✈️ Embraer ERJ145 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:3127538
💡 Designed by heri_3d

@cults3d #diecastcars #3dprinted #planegeek #makersmovement

Embraer ERJ145 1:500 - SLA 2

The Embraer ERJ145 is a slender, low-wing regional jet known for its long, narrow fuselage and distinctive 1–2 seating layout. Its twin rear-mounted engines and T-tail give it a clean, streamlined profile built for efficient short- to medium-range routes. The aircraft’s crisp panel lines, pointed nose, and balanced proportions make it instantly recognizable among regional jets. ERJ 145 1/500 version with panel lines and two wings separated. And here is the previous version, https://cults3d.com/en/3d-model/architecture/embraer-erj145-1-500-sla. You can see how I printed it and its supports through this link, https://www.youtube.com/watch?v=aC8_9qfDehI, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D
All Hands ActiveDec 28

Today at All Hands Active: Open Hours from 2 - 6pm! Our open hours are free and open to the public.

Open hours is your weekly chance to get together with other makers! Learn about and use our tools, share a project you are working on, or just hang out and enjoy the creativity.

#annarbormichigan #makerspace #makersgonnamake #makers #makersmovement #handmade #creative #diy

All Hands ActiveDec 21

Today at All Hands Active: Open Hours from 2 - 6pm! Our open hours are free and open to the public.

Open hours is your weekly chance to get together with other makers! Learn about and use our tools, share a project you are working on, or just hang out and enjoy the creativity.

#annarbormichigan #makerspace #makersgonnamake #makers #makersmovement #handmade #creative #diy

All Hands ActiveDec 18

Tonight at AHA: Repairsday (6 pm - 8 pm - in person)

Need to repair something? Bring your broken stuff to our FREE weekly repair event! If your gadgets' next destination would otherwise be the recycling or
landfill, we give repairing it our best shot!

Repairs are not guaranteed. We are not liable for damage or unsuccessful repairs. You must stay with your items.

#annarbormichigan #makerspace #makersgonnamake #makers #makersmovement #handmade #creative #diy #mending #repair

All Hands ActiveDec 14

Today at All Hands Active: Open Hours from 2 - 6pm! Our open hours are free and open to the public.

Open hours is your weekly chance to get together with other makers! Learn about and use our tools, share a project you are working on, or just hang out and enjoy the creativity.

#annarbormichigan #makerspace #makersgonnamake #makers #makersmovement #handmade #creative #diy