The Journey starts towards Free and Open PLCs - Colibri #3
In this episode, we start programming the Colibri at firmware level. We will look at the I2C multiplexor and the MCU3, which contains a STM32F405RG, with a dual-color LED.
#stm32world #homeautomation #industrialautomation #makers #makersgonnamake #plc #plc_programming #homeassistant
✈️ Northrop YF-23 Black Widow II 1:72 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:137309
💡 Designed by @Herisuprapto
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The Northrop YF-23 Black Widow II prototype was a striking fifth-generation fighter concept engineered for exceptional stealth and supercruise capabilities. Its distinctive features included a blended wing-body configuration, fixed low-observable exhaust troughs, and unique canted V-tails to minimize radar cross-section while enabling sustained supersonic flight without afterburners. Update (04/26/2020): Sorry I forgot to do something, the STL file that I was supposed to attach was a compressed (.zip) file, so I just did. The prototype stealth aircraft is a rival of the YF-22. I attach .pdf which consists of Description and Parts and Instructions. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ McDonnell Douglas DC-10-30 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:483948
💡 Designed by @Herisuprapto
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The McDonnell Douglas DC-10-30 is a classic long-range trijet, recognizable by its two wing-mounted engines and a distinctive third engine integrated into the vertical stabilizer. This wide-body workhorse uses a robust landing gear setup and features an extended fuel capacity compared to its domestic siblings, making it ideal for intercontinental routes. This model is printed using an FDM printer, I hope you like it, thank you. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ B737-800W 1:500 - SLA 2 • STL files
➡️ Download 3D print model: https://cults3d.com/:2253213
💡 Designed by @Herisuprapto
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The Boeing 737-800W is characterized by its blended winglets, optimized for reduced drag and improved fuel efficiency across medium-haul operations. Its elongated fuselage, advanced aerodynamic surfaces, and refined control geometry contribute to stable handling and consistent performance. B737-800W 1/500 - SLA, 2025-06-25, the front landing gear of this model has been thickened, but I still uploaded the fuselage with the previous landing gear. And the fuselage that is not in the center does not need to be fixed, but I uploaded the two wings that have been exported without moving their positions. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ ATR 72-600 1:400 – SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:3749593
💡 Designed by @Herisuprapto
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The ATR 72-600 is a modern regional turboprop, distinguishable by its six-bladed propellers and optimized performance for short-haul routes.1 Its flight deck features an advanced avionics suite, including the innovative $ARINC~429$-based Thales $AHRU$ (Attitude and Heading Reference Unit), enhancing crew efficiency and situational awareness. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Are you a maker or into 3D printing? Come hang out with Chris and me along with other fellow makers. It doesn’t matter what your experience level is. Everyone is welcome.
Our next meetup is Monday, March 16th at Formula Brewing in Issaquah.
I’ll also be showing off this 3D printed R2D2 that I made.
RSVP in the below:
#MakerCommunity #3DPrinting #3DPrintLife #PNWMakers #Issaquah #FormulaBrewing #StarWars3DPrints #R2D2 #MakersGonnaMake #3DPrintingCommunity
It's past 8 o'clock. Do you know if your children are inventing stuff?
https://www.etsy.com/uk/listing/1432948674/kids-inventing-stuff-metal-sign-funny
#makingmemories #making #kids #kidsactivities #familytime #family #crafts #crafting #makersgonnamake #makersmovement #makercommunity
✈️ Antonov An-124 Ruslan 1:500 - FDM • 3D files
➡️ Download 3D print model: https://cults3d.com/:153362
💡 Designed by @Herisuprapto
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The Antonov An-124 Ruslan is a massive strategic airlift jet designed for moving super-heavy and oversized cargo, featuring a unique, multi-leg kneeling landing gear system and a hydraulically operated upward-hinging nose section. This configuration allows for true roll-on/roll-off capability through both the forward visor-style nose door and the rear fuselage ramp, making it incredibly versatile for self-sufficient loading and unloading operations in remote or unprepared locations. An-124-100 kneeling with a front and back ramp, there is also cargo space until backwards. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
✈️ Dassault Falcon 7X 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:483952
💡 Designed by heri_3d
@cults3d #diecastlovers #makersgonnamake #fighterjet #cults3d
The Dassault Falcon 7X is a distinguished trijet known for its sophisticated fly-by-wire flight controls, making it one of the first business jets to employ this technology. This large-cabin aircraft utilizes three rear-mounted Pratt & Whitney Canada PW307A turbofans to achieve impressive range and efficient performance. This model is printed using an FDM printer, I hope you like it, thank you. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
STM32World
Heri_3d
Matt Evans
Andrew Lewis Workshop
Hikarii
