Steam & Epic Games | Daily🌌 Prusa i3 MK4 with the Galaxy Black MK4S upgrade, SNAG IT while it's hot 🔥
👉 LINK https://www.facebook.com/groups/1910026672591728/posts/3982774668650241/
Facebook
normand 🚴Comme on a maintenant une Prusa #MK4S au bureau, et qu'on peut l'utiliser pour des projets persos, je me réintéresse à l'#impression3D.
J'ai passé une bonne partie du weekend à explorer le site Printables, avec une recherche sur les accessoires pour le vélo. Je n'en suis pas venu à bout. La variété des projets est impressionnante!
Évidemment, j'ai des projets spécifiques que je devrai concevoir... 🤔
J'ai passé une bonne partie du weekend à explorer le site Printables, avec une recherche sur les accessoires pour le vélo. Je n'en suis pas venu à bout. La variété des projets est impressionnante!
Évidemment, j'ai des projets spécifiques que je devrai concevoir... 🤔
Jess RobinsonHow it's going: This morning it had printed ~10mm of part and was "printing" 10cm in mid air above the print.
Somehow new spools are an issue lately, filament doesn't load, prompts me to unload, I tap unload, it unloads, I tap load, it loads, we continue printing !
JürgenGoodbye dear #prusa3d #mk4s
Hello new Core One + ❤️
Upgrade going smooth so far. Disassembled the MK4S in about 3h, will start to build the C1 tomorrow.
#3dprinting #upgrade #diy #maker #kit
Hello new Core One + ❤️
Upgrade going smooth so far. Disassembled the MK4S in about 3h, will start to build the C1 tomorrow.
#3dprinting #upgrade #diy #maker #kit
DennisI have also discovered why I seem to get duplicate prints in my queue sometimes. When you send gcode to the queue from Prusa Slicer, you get a prompt on the printer screen. If you tell it to print from this screen, this is actually a separate job from what is in your queue. Unfortunately this issue is already a year old.
https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/4056 #Prusa #Mk4S #3DPrinting
[ENHANCEMENT] PrusaConnect, do not show new file on xLCD, if file is already queued through PrusaConnect/Link · Issue #4056 · prusa3d/Prusa-Firmware-Buddy
Printer model MK4, XL Describe the enhancement We have an XL and a MK4 in my team, that I recently connected to PrusaConnect as our print farm management tool. Some of my teammates have been gettin...
Update to my #Prusa #Mk4S load cell issues: tightening the screws on the back of the toolhead (which were weirdly loose) pretty much solved all my problems. Though I still need to give the filament some slack or it will still have problems with nozzle cleaning. Not to the point of bizarre failure and orange-screen-of-death though. #3DPrinting
Balu
Will Hopkins 🌈📸It's not a great picture, but you can see the issue I'm having with curling. The corners curl like crazy on any print that takes up a large portion of the print bed, and it seems like bed adhesion in the corners is low, even with brims and supports.
Does this mean my heat bed doesn't heat evenly? Excessive cooling on the corners? Not enough cooling?
By printing small and in the center I can get reliable prints but this is driving me nuts. #3dprinting #prusa3d
PLA, Prusa #Mk4S
KabumPrusa MK4S DESTRUTTURATA - MONTAGGIO
Prusa MK4S DESTRUTTURATA - MONTAGGIO
Ketil FroynAs a long-time 3D printing and open source enthusiast, I'm happy to finally make the switch to #Prusa #mk4s for a quality #European product. I've had my eyes on Prusa Research for several years.
I got my first printer in 2011, and we've come a long way since then! Thanks, @josefprusa!
