Mastodawn

AUDIOPHILE MAN - HiFi NEWS
New Head Box S3 B & DS3 B headphone amps deliver real balanced circuitry — not just sockets.
⚡ Up to 1.5W @ 30Ω
🔌 XLR + 4.4mm
🏗️ All-metal, EU-built
Click: https://theaudiophileman.com/head-boxes-from-pro-ject/
Serious power for serious headphones.
#ProJect #HeadphoneAmp #HeadFi #Audiophile #HiFi #BalancedAudio #AudioGear #HiFiLife

Paul Rigby Sep 3, 2025

AUDIOPHILE MAN - HiFi NEWS: GO BLU AIR FROM IFI
The GO blu Air gives you a portable headphone amp with Bluetooth – for your source device – built in: theaudiophileman.com/go-blu-air-f... #MusicOnTheGo #PocketHiFi #WirelessHiFi #Bluetooth52 #UpgradeYourSound #TravelCompanion #HiFiLifestyle #iFiAudio #GObluAir #PortableDAC #HeadphoneAmp #BalancedOutput #XBass #XSpace #HighResAudio #HeadFi

Paul Rigby Aug 18, 2025

AUDIOPHILE MAN - HiFi NEWS: HPA V324 HEAD AMP FROM VIOLECTRIC
...features a ‘true balanced’, fully differential circuit topology, incorporating four amp stages…https://theaudiophileman.com/hpa-v324-head-amp-from-violectric/ #Violectric #HPAV324 #HeadphoneAmp #Audiophile #HeadFi #HiFiAudio #BalancedAudio #Electromod

Elwin van Eede Aug 5, 2025

Thrilled with my iFi Audio ZEN CAN Signature (2023) analog headphone amp. Coming from the original ZEN CAN (2020), the sound improvement is genuinely noticeable on my Sennheiser HD600 and especially on my HiFiMAN Edition XS.

#HiFi #Headphones #iFiAudio #AudioGear #HeadphoneAmp

stuck.media Jun 3, 2025

A local musician ordered a pair of custom #HeadphoneAmp #cables.

These use industry-standard #digiflex cable and #neutrik ends. Plain black heatshrink.

dpFX Pedals Feb 8, 2025

Headphones amp for pedalboards & rehearsal (with mp3 AUX in).

This is a full stereo mixer with a headphones out. The standard input can be used to connect the signal from your pedalboard (stereo or mono) and the AUX-In can be used to connect a phone/mp3 player/sound card line out or other similar device.
Both inputs are mixed and routed to the headphones out to assist you on a “silent” rehearsal.

The device is also equipped with a TRS THRU output, this way whatever signal is routed to the input can also be picked up by any other device you’ll connect to the THRU output (like an amp, or another pedal) and it will remain unaffected because of the very high input impedance of the device’s buffer.

Internally a separate mixer circuit converts the Stereo Input signal to mono and routes it to the balanced XLR output.
The input volume control does not affect the level of the XLR out. The AUX-in signal does not output to the XLR.

- ST/M Toggle switch: allows you to select the type of signal (Stereo or Mono) that is being routed to the input. If you are working with a mono signal this toggle switch ensures that you will be hearing the same mono signal in both L+R channels of your headphones.

3 knobs:
- Input Volume knob
- AUX-IN volume knob
- Headphones-out volume knob

If any of the Input signals is too hot and causes distortion to your headphones just attenuate it from its respective volume knob.

**** Check photo section for a detailed signal flow chart ****

Technical specifications:
▹ Input impedance: 10Mohm
▹ THRU output impedance: equal to output impedance of the device you’ve connected to the input.
▹ XLR output impedance: 100ohm
▹ Circuit equipped with filters to avoid RF interference.
▹ Voltage Required: DC 9-12 Volt (12V will offer more headroom).
▹ Polarity: Negative tip
▹ Typical current draw: 40~200mA (depends on volume setting, and type of headphones)

#dpFXpedals #dpFX #dpeffects #headphonesamp #headphoneamp #headphonesampforpedalboards #boutiquepedals #pedalseffects #handmadepedals #pedalsandeffects #stereopedals #greekpedals #pedalbuilder #rehearsalgear #silentrehearsal