AweSun Cloud KVM Q1 Review – An ultra-compact, low-cost KVM over IP solution tested with Windows 11 and Android clients

https://fed.brid.gy/r/https://www.cnx-software.com/2026/06/07/awesun-cloud-kvm-q1-review-an-ultra-compact-low-cost-kvm-over-ip-solution/

AweSun Cloud KVM Q1 Review – An ultra-compact, low-cost KVM over IP solution tested with Windows 11 and Android clients

AweSun has sent me a sample of their "Cloud KVM Q1" 4K KVM over IP solution for review. It's a compact device with the minimum number of ports for a connected KVM: USB-C for keyboard and mouse emulation, HDMI input for video, and Ethernet for connectivity to the host. Like other such KVMs, it enables hardware-level remote access even in the BIOS, and the company advertised remote access to server, computer, and mobile phone targets, with the latter requiring an additional USB-C dock for HDMI input. I'll start the review by going through the specifications, performing an unboxing and a teardown, and testing both mobile and desktop clients with targets like a Raspberry Pi 5 and an Android mobile phone. AweSun Cloud KVM Q1 specifications Here are the specifications from the company: Video Input HDMI port Resolution - Up to 2560 x 1600 with 15 FPS framerate Networking 100Mbps RJ45

CNX Software - Embedded Systems News
Netzwerkmanager für HP OMEN 16-ap0286ng › Netzwerk und Internetzugang einrichten › Systemverwaltung, Installation, Aktualisierung › Forum › ubuntuusers.de

Erqos EQSP32CE – An industrial IoT ESP32-S3 PLC with Ethernet, RS232, RS485, CAN Bus, DIN Rail support

Erqos EQSP32CE is a DIN rail-mountable industrial IoT PLC based on an ESP32-S3 WiFi and Bluetooth SoC and offering Ethernet, RS-485, RS-232, and CAN bus industrial communication interfaces. The IIoT logic controller also features several protected digital (16x) and analog (8x) inputs, eight current inputs, eight "special mode" analog inputs, and sixteen digital outputs with PWM support. A USB-C port is used for firmware flashing and monitoring, and the PLC takes a wide 7V - 26V DC input voltage and outputs 5V/1A for I/O expansion modules. Erqos EQSP32CE specifications: SoC - Espressif ESP32-S3 dual-core LX7 processor @ 240 MHz with 8MB Flash, 512kB RAM, wireless connectivity (so probably ESP32-S3FN8) Communication interfaces 10/100 Mbps Ethernet RJ45 port Wi-Fi + Bluetooth Low Energy (on ESP32-S3) with internal antenna RS232 (protected) and RS485 half-duplex (protected) with support for Modbus RTU, DMX512, and custom serial protocols CAN Bus (protected) USB - 1x USB-C power for

CNX Software - Embedded Systems News
Kein LAN nach Bereitschaft › Netzwerk und Internetzugang einrichten › Systemverwaltung, Installation, Aktualisierung › Forum › ubuntuusers.de

Intel Ethernet E835: Der nächste High-Mainstream-LAN-Controller ist da

Intel ergänzt sein Ethernet-Portfolio um den E835, der als Follow-up zum E810 platziert wird. Er soll als Komplettpaket überzeugen.

ComputerBase

Routing is not one-size-fits-all—different routing methods optimize for different goals, from shortest paths and traffic balancing to explicit path control and traffic engineering 😎👇

Find high-res pdf ebooks with all my networking related infographics from https://study-notes.org

#datacenter#networkengineer #routing #ethernet #cloudengineer

As Ethernet speeds continue to climb, optical transceivers have become a key part of modern networking. They convert electrical signals into light, enabling high bandwidth links over fiber where copper cables can no longer meet the speed or distance requirements.

Here are different types of optical transceivers 😎👇

Find high-res pdf ebooks with all my networking related infographics at https://study-notes.org

#datacenters #ethernet #cloudengineer #networkengineer #networkinfrastructure

Revisiting Making Your Own Internet Router In 2026

After my recent misadventures setting up an OpenWrt installation on a scruffy e-waste-level x86 PC, quite a few people chimed in with feedback, criticism and friendly hostility regarding things lik…

Hackaday