Mastodawn

✈️ Bombardier CRJ1000 1:500 - FDM • STL files
➡️ Download 3D print model: https://cults3d.com/:483945
💡 Designed by @Herisuprapto

@cults3d #airplanemodels #custommade #cessna #shareyouraviation

Bombardier CRJ1000 1:500 - FDM

The Bombardier CRJ1000 is the largest variant in the CRJ regional jet family, sporting a stretched fuselage that allows for up to 104 passengers. Its design retains the distinctive high wing and aft-mounted engine configuration common to the series, optimized for efficient short-to-medium-haul operations. This model is printed using an FDM printer, I hope you like it, thank you. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D

AvDelphi 4d ago

Swiss Air Force Cessna C560 XL Excel MSN 560-5269 Zurich, Switzerland
#AvDelphi #T784 #Cessna #C560XL #Excel #ZurichAirport #SwissAirForce
https://www.avdelphi.com/i/247308

Manc AvGeek May 15

On This Day 15th May 1993.

G-HFCT, Reims-Cessna F152, Stapleford Flight Centre, on display as a stationary billboard at North Weald Fighter Meet, 15th May 1993.

#London #NorthWeald #EGSX #FighterMeet #AirShow #Reims #Cessna #C152 #StaplefordFlightCentre #OnThisDay
#AvGeek #aviation #planespotting #photography

AboveVenhuizen May 15

#PHLAB: NLR-National Aerospace Laboratory (#Cessna C550, registration: PH-LAB)
Route: No route available
Min. distance: 0.3nm away @ 16550 ft
Heading: NE @ 341.4kts
Time: 15:58:50
#MovingQuickly #adsb #Venhuizen

AboveVenhuizen May 15

#PHSTW: Private (#Cessna C172, registration: PH-STW)
Route: No route available
Min. distance: 1.0nm away @ 1400 ft
Heading: W @ 0.0kts
Time: 14:15:26
#adsb #Venhuizen

Manc AvGeek May 15

Photo of the Day 15th May 2026.

[…]

https://mancavgeek.co.uk/2026/05/15/photo-of-the-day-15th-may-2026/

Flying May 11

Rogue Valley International-Medford Airport KMFR → Roseburg Regional KRBG

A calm day with barely any wind. In the evening, a few hot air balloons took to the sky. Just before sunset, I touched down in Roseburg with the trusty Cessna 172.

#XPlane #XPlane12 #FlightSim #Oregon #Medford #RogueValley #KMFR #Roseburg #KRBG #Cessna #Cessna172 #C172

Sam - WiredForFlight May 11

Flight to see Mom for Mother’s Day was not as bumpy as yesterday but higher (5500’) up the more bumpy it was so kept low (3500’) for most of the flight.

Love flying over other airports looking to see what is going on.

#Pilot #FlyAOPA #Flying #Aviation #AVGeek #Airplanes #generalaviation #FlyCessna #Cessna #cessna172 #FlightDeckMonday

Heri_3d May 9

✈️ E190-E2 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:1098910
💡 Designed by @Herisuprapto

@cults3d #airplanemodels #custommade #cessna #shareyouraviation

E190-E2 1:400 - SLA 1

The E190-E2's wing design incorporates a high aspect ratio and advanced aerodynamics, significantly contributing to its exceptional fuel efficiency and performance. Its integrated engine and airframe configuration, including the highly efficient Pratt & Whitney PurePower Geared Turbofan engines, provides a noticeable reduction in noise footprint and operational costs. This model was printed by someone before because at that time I didn't have an SLA printer, the two printout pictures above are from him. This version has less detail (no wing and tail outlines, etc.) than this one, https://cults3d.com/en/3d-model/architecture/e190-1-400-resin-printer. Hope you guys like it, thanks for stopping by. Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.

Cults 3D

Frank 🛰️🛩️🪂⛵🛵🎿🔭May 9

🤩 Second day of jumping this weekend! 🪂 The #Cessna #C208 is getting the job done! 🛫
#avgeek #aviation #skydive #skydiving #Fallschirmspringen #Fallschirm #Altenstadt #ETHA