Marcin Lis (Fox)
minnixPrototype mount in PLA for a chamber heater for the Centauri Carbon built in OnShape. M4 bolts with hidden nuts and inserts for ND magnets to attach the mount without drilling. This will wire to a thermostatic socket to turn it off and on. Next I'll print the real one in ASA and wire everything up and say goodbye to warps and shrinks when printing with engineering materials. #3dprinting #centauricarbon
Simon WaltersReally liking some #eSUN #ASA+ that I'm currently printing with for outside garden use. Printing at 270C nozzle and 110C for the bed on my #ElegooCentauriCarbon
Sticks to the bed quite nicely .Needs brims for narrow stuff but the brims come away very cleanly when the part is cool. (I use a can of freezer spray if I need my prints cooling quickly)
I've had an idea
https://discourse.nodered.org/t/flow-needed-for-image-recognition/99789
#3DPrinting #CentauriCarbon
#OrAnyPrinter with a webcam reachable via LAN IP
Flow needed for image recognition
Ok - what I want is a flow that can look at the image from my Centauri Carbon webcam and determine if there is a previous print still sittng on the bed. In my mind, this would seem to be a useful job for an Awful Idiot piece of image recognition software. I view whats going on via an IP address http://192.168.0.184/network-device-manager/network/control and this what it shows when nothing is lying on the bed so in my mind, all it has to do is detect a small (configurable) difference from...
I've made a cover to protect my new PEI bed for my #Neptune3Pro as I realised that my #CentauriCarbon plate was just about big enough to print one.
So should keep it safe from when I do stupid things like putting my coffee cup down on it :)
// @mythlfrythtyg @kianryan @biglesp
#3DPrinting
JakJakI picked up a cheap 0.6mm nozzle to test on my #centauricarbon and uh yeah no thanks
Not gonna lie, I feel let down by the first layer quality from my #ElegooCentauriCarbon ...
Some corners are just way more squished than others. On the old Prusa MK3 I would have the option to adjust the offset for each side, but I've found no such thing here.
I see people raving about perfect first layers on the #centauricarbon, just like I'm getting on my P1S. Am I missing something? Is the loadcell not doing its job?
I felt almost almost nostalgic when I realized I had to adjust the Z-offset, but sadly that does not take height differences into account.
Looks likely that there won't be a multi-colour upgrade for the #CentauriCarbon
https://www.elegoo.com/en-gb/blogs/news/update-notice-on-centauri-carbon
Update Notice on Centauri Carbon
Dear Centauri Carbon Users, Thank you for your continued support for Centauri Carbon since its launch. We have received positive feedback on its user-friendliness, printing speed and quality; Additionally, the multicolor add-on has been highly anticipated. Based on recent feedback, we hereby share with you the followin
Completed this hinge lid conversion for my #CentauriCarbon
https://makerworld.com/en/models/1683581-self-locking-hinge-for-centauri-carbon-v2#profileId-1783814
#3DPrinting
Most printed using white #Elegoo PLA+ with the springs and sidearms printed using #ASA