@llanion

I never knew this was a thing, as my #Creality #CR6SE came with it. But damn, when I heard an #Ender3 for the first time, I was thankful.

@3dprinting #3dprinting

@stooovie

I reduced my toolhead's weight on my #Creality #CR6SE by about 200g with a custom cooling duct and also improved it because it isn't one-sided.

But many Thingeverse solutions are jank!

@3dprinting #3dprinting

@koz

Interesting, I never knew that. Because damn, I flashed some dank firmware to my #Creality #CR6SE.

It might just be to help protect users and almost help to ensure warrenty. But does this also hold for all other #Prusa printers? Is this why fewer users are running #Klipper on #MK3 and #MK4?

@3dprinting #3dprinting

@geekandi @infosecdj @OttersDangerDen @astrovore

The guys on the #CR6SE Discord finally answered. They day there are trim pots on the stock board that I can adjust to reduce the current, but it isn't possible with software.

So I think I'll open the printer, meausre all of the motor currents, then adjust them. If I mess anything up, I can just go back to the old values.

@3dprinting #3dprinting

@OttersDangerDen

I am using the stock #Creality #CR6SE setup and board, with stock motors and drivers. I have asked on your CR6SE community discord now whether it is possible.

@infosecdj @geekandi

@3dprinting #3dprinting

@jmw

#TeachingTech on Youtube has a video for #Creality #CR6SE style leveling, which is what I have, for the #Ender3

https://youtu.be/hs6IVfNrf5k

Load cell leveling is great, I use it, but it can have its quirks. Just make sure that the bowden tube doesn't mess with the sensor. If you have a direct drive, then I think it would be one of the best solutions if you don't have the flexibility of a #Voron #Stealthburner.

@3dprinting #3dprinting #Klipper

@nilsding

Just to make sure, you are running #Klipper here with the native Klipper LCD support? That is also the default #Ender3 display, right?

It really looks great! I just love the icon for the nozzle, it looks very good. I've been wondering if I want to go for a touch screen and #KlipperScreen or just for an LCD display like this. I have a #Creality #CR6SE, so my fisplay is currently not working with Klipper.

@3dprinting #3dprinting

@geekandi

The #Creality #CR6SE had a large footprint because it is a bed slinger, so to enclose it completely, I have an 80x80x80 enclosure around it. That's a lot of air. For fast high prints, using the bed is too slow.

I pf course overkilled it, and it isn't necessary, but I can set a temperature from room temperature to 60°C and it is automatically controlled.

So, because I can😂

@3dprinting #3dprinting