SchmakerBIQU Panda Breath: Aktivní ohřev komory pro Bambu Lab - Unboxing
PeerTube
JakJakAnd there we go, I designed my own riser to route the cable out the back.
Installation is a bit finicky, I don't like the two cable holders glued to the walls with no spares. But it's a nice fit!
What do you mean the bed alone is able to get the chamber temperature up to 50 degrees and I could just let it heat soak...
Got a chamber heater for my P1S :3
I need to print a riser for the glass lid in order to route the cable out, but I tested it outside the printer today. Seems to work great, if loud
Automatically turning on based on target bed temperature is killer! Even if it needs to be on WiFi
Biqu Panda Station a Panda Den - Vybalení/Unboxing a první problémy
Biqu Panda Station a Panda Den - Vybalení/Unboxing a první problémy
Alexey SkobkinЕщё жду Glacier от BIQU
Таки дождался пластины от BIQU.
И должен сказать, что она теперь - мой дефолт, судя по всему.
Glacier не такая злоебуче липучая как Super Tack, но она более предсказуемо липучая.
Если с SuperTack у меня (видимо, из-за неравномерного прогрева стола) всё сильно липло по центру, но могло ещё на первом слое не держаться с краю, то тут на большей части поверхности адгезия чуть слабее, но равномернее и стабильнее.
Столбик под 45 градусов я тут не пробовал печатать - да и он, скорее всего, отвалится не допечатавшись до конца. Но вот реальные принты показывают хорошие результаты - точно лучше, чем на пластине по умолчанию (Textured PEI).
Так что вполне могу рекомендовать попробовать эту линейку.
P.S. Кстати, в отличие от SuperTack её (именно Glacier вариант, не Frostbite) можно чистить спиртом, что ещё больше упрощает обслуживание.
P.P.S. Принт посвящается @blue
#3D #printing #log #buildplate #heatbed #adhesion #Bambu #BIQU #Glacier #thoughts #video
LeRoy MillerMy Adventures with the Biqu BX 3D printer
https://kd8bxp.blogspot.com/2025/10/my-adventures-with-biqu-bx-3d-printer.html
LeRoy MillerI picked this 3D printer up at the same time I bought the Anycubic Kobra 3 combo. It was being clearance out and was cheap - actually I picked up this Biqu BX and a Biqu B1 printer.
Now ask why when I was getting a better printer? I'll say it was cheap!!
That was a year ago maybe longer -
I finally got around to hooking it up and using it.
What a pain in the *** this has been, who thought HDMI was a good cable to use for the print head/sensors
Angelic_Mew 
I got my #Biqu B1 running with #Klipper via #MainsailOS.
Man it was difficult for me. Being the idiot I am, it took way longer than it should or would have taken anyone else.
But it's back up and running with MULTIPLE backups of the configs on my laptop.
Now I just need to tweak the configs untill it prints reliably. Like... I KNOW I must have messed up the Pressure Advance config. But for, i can print again after a month of downtime.
Natanox 🇺🇦🇵🇸I've got a really weird issue I need help with:
My modified 3D printer got a Z-Probe (BIQU Microprobe) for calibration. However, for some weird reason, it always falsely measures the left side of the print bed causing that side of prints to get this weird texture-related elephant foot while the right side lacks adhesion (and texture).
I do not understand why the probe would falsely measure on the left, but not the right. It's a classic i3 bedslinger.
#3DPrinting #Klipper #diy #Biqu #3DDruck
Welp... 
the penny dropped.
I was wondering when something was gonna go wrong.
I was looking into upgrading my #Biqu B1 #3dprinter firmware because 1) it's old (2020) and 2) I was missing features that I see others have online.
Copied some files to SD card and tried the mobo firmware first but nothing happaned. Did some other work and forgot the screen update was still on the SD. Wanted to print something and now the screen updated and doesn't work with mobo. 