SAS Airbus A350-900 departing San Francisco
@flysfo @flysas @airbus
#PlaneSpotting #Aviation #AviationPhotography #FlySAS #wearescandinavia #SanFrancisco
April 1, 2026 at 01:31PM
via Instagram https://instagr.am/p/DWmkEJDlEPW/
0 likes, 0 comments - peter_reinold on April 1, 2026: "SAS Airbus A350-900 departing San Francisco @flysfo @flysas @airbus #PlaneSpotting #Aviation #AviationPhotography #FlySAS #wearescandinavia #SanFrancisco".
Ryanair Boeing 737 MAX 8-200, EI-IJK
Landing at Belfast International Airport today from Alicante and departing later back to Alicante
#aviation #aviationlovers #aviationphotography #photography #nikonphotography #ryanair #belfast
✈️ Cessna 172 1:400 - SLA 1 • STL files
➡️ Download 3D print model: https://cults3d.com/:3057042
💡 Designed by @Herisuprapto
@cults3d #scalemodel #3dprinter #aviationphotography #modelmaker
The Cessna 172 is a versatile, single-engine aircraft known for its reliability and ease of handling, making it a popular choice for flight training and recreational flying. With a high-wing design, it offers excellent visibility for pilots and passengers alike, while its spacious cabin provides comfort during long flights. This aircraft's smooth performance and efficiency have earned it a reputation as one of the most successful and widely used planes in aviation history. This model is available in two versions: one with and one without extruded windows. The key update from the previous design is the propeller, which is now rotated 45 degrees (rather than parallel) and includes a shaft. This propeller shaft is designed to fit directly into the aircraft's nose. For those curious about the original, you can find the previous version here: https://cults3d.com/en/3d-model/architecture/cessna-172-1-400-sla https://www.youtube.com/watch?v=VlYF2s5cIOQ SLA Printing Note: For optimal results, SLA models are printed rotated 90 degrees, perpendicular to the build plate, https://www.youtube.com/watch?v=pL8M6CRNcVs. Thanks for stopping by! Here’s what each label means: - FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls. - SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines. - SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Airbus A380 vs Beech C90B King Air Size Comparison. Also Jet vs Prop!
Taken at SFO.
@Emirates @flysfo @beechcraft #AviationPhotography #PlaneSpotting #Beech #Airbus #A380
March 31, 2026 at 08:36PM
via Instagram https://instagr.am/p/DWkv5FdlDAU/
0 likes, 0 comments - peter_reinold on March 31, 2026: "Airbus A380 vs Beech C90B King Air Size Comparison. Also Jet vs Prop! Taken at SFO. @emirates @flysfo @beechcraft #AviationPhotography #PlaneSpotting #Beech #Airbus #A380".
Emirates Airbus A380 vs Gulfstream G500 Size Comparison at SFO.
To be fair, the A380 was on the runway and the G500 on the taxiway behind the Airbus.
Which one would you choose?
@Emirates @San Francisco International Airport (SFO) @gulfstreamaero #SFO #A380 #Gulfstream #G500 #AviationPhotography #Aviation #SanFrancisco #PlaneSpotting
March 31, 2026 at 08:30PM
via Instagram https://instagr.am/p/DWkvOKylOsi/
0 likes, 0 comments - peter_reinold on March 31, 2026: "Emirates Airbus A380 vs Gulfstream G500 Size Comparison at SFO. To be fair, the A380 was on the runway and the G500 on the taxiway behind the Airbus. Which one would you choose? @emirates @San Francisco International Airport (SFO) @gulfstreamaero #SFO #A380 #Gulfstream #G500 #AviationPhotography #Aviation #SanFrancisco #PlaneSpotting".
Spotters 70 Aviation
Errol Cavit
Peter Reinold
TheSnoopySnoop
Heri_3d
Rose LaCroix
Jo H ✈️