Airbus A320neo 1:500 - FDM
The Airbus A320neo (New Engine Option) is a popular family of narrow-body airliners featuring significant efficiency improvements, primarily through the incorporation of new-generation CFM LEAP-1A or Pratt & Whitney PW1100G geared turbofan engines. This re-engined variant boasts a $\mathbf{15\%}$ reduction in fuel consumption, extended range, and lower noise footprint compared to its predecessor, making it a key component in many airline fleet modernization plans.
The .stl file, a brief explanation of the print settings, how to assemble it in .pdf format, it's all in a compressed file to make it easier for me to upload. Tell me your opinion or advice about the model or other, thank you.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Airbus A330-300 1:500 - FDM
The A330-300 is a versatile, wide-body jetliner known for its extended fuselage and medium-to-long-haul operational range, typically employing efficient twin-engine powerplants to achieve a high passenger and cargo payload capacity. Its design incorporates advanced fly-by-wire flight controls and aerodynamic optimizations, making it a reliable workhorse for airlines seeking a balance of capacity, range, and operational economics.
This is a request from a new friend, basically, this is a modification of the A330-200 I've created before.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Cessna 172 1:400 - SLA 1
The Cessna 172 is a versatile, single-engine aircraft known for its reliability and ease of handling, making it a popular choice for flight training and recreational flying. With a high-wing design, it offers excellent visibility for pilots and passengers alike, while its spacious cabin provides comfort during long flights. This aircraft's smooth performance and efficiency have earned it a reputation as one of the most successful and widely used planes in aviation history.
This model is available in two versions: one with and one without extruded windows. The key update from the previous design is the propeller, which is now rotated 45 degrees (rather than parallel) and includes a shaft. This propeller shaft is designed to fit directly into the aircraft's nose.
For those curious about the original, you can find the previous version here: https://cults3d.com/en/3d-model/architecture/cessna-172-1-400-sla
https://www.youtube.com/watch?v=VlYF2s5cIOQ
SLA Printing Note: For optimal results, SLA models are printed rotated 90 degrees, perpendicular to the build plate, https://www.youtube.com/watch?v=pL8M6CRNcVs.
Thanks for stopping by!
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Kryptonian Command Key - FDM
The Kryptonian Command Key, or Codex Key, is a highly advanced piece of alien hardware, serving as a versatile data storage and access device. It employs complex Kryptonian crystalline technology to interface with and control critical systems, holding the genetic blueprint and knowledge of an entire civilization within its structure.
Kryptonian Command Key is an inspiration from the Man of Steel film, consisting of three parts glued with super glue, combine parts 1 and 2 with glue then 3.
You can add paint, the process is in the photo attachment from start to finish, hope you enjoy it, please give me input for anything, thank you.
https://www.instagram.com/heri_3d/
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
@M4x @moira @Eka_FOOF_A @rahix @GeekAndDad Wow - there is a LOT of great tips here. If you are designing parts to be printed you should read this!
#3dprinting #3dprintingcommunity #3dprintinglife Reminder: Monday night is our @makerdeck Monthly Mixer, a great way to meet other makers in the PNW. It does not matter if you are a beginner or an expert, everyone is welcome. Bring your ideas and prints and show them off. You can RSVP in our Facebook group.
We meet in Issaquah at Formula Brewing the third Monday of every month from 6 to 8 PM.
#MakerDeck #MakerCommunity #PNWMakers #3DPrintingCommunity #TechCommunity #MakerMeetup #Issaquah #MakersGonnaMake #CreativeCommunity #3DPrintLife
E190 1:400 - SLA 2
The Embraer E190 is a sleek, narrow-body twinjet known for its comfortable 2-2 seating configuration, optimizing passenger flow. Its high aspect ratio wing and efficient GE CF34-10E engines provide excellent performance for regional routes.
Someone gave me a suggestion to upload this, E1900, on Cults, so I did. This might make you confused, the attached pictures above are with 1:600, the one on the right is the whole model and the one on the left is the one where the two wings are separate but one whole part. The file that you will download later is with 1:400 and has never been printed before, the wings are split in two, the right and left, this I did because the results are better especially for the print, and this has been done on other models before. This model was printed using the Anycubic Photon Mono printer, hope you like it, thanks for stopping by.
Here’s what each label means:
- FDM: Printed on an FDM machine. These versions have lower detail, no panel lines, no engine blades, and use thicker walls.
- SLA 1: Printed on an SLA machine. These include antennas, include engine blades, have thinner walls, but still do not have panel lines.
- SLA 2: Same as SLA 1, but with added panel lines for higher surface detail.
Reminder: The @makerdeck mixer is at Formula Brewing in Issaquah tomorrow night from 6pm-8pm. If you want to meet other makers and tech people, come hang out, share ideas, and connect. Everyone is welcome.
#MakerDeck #MakerCommunity #TechCommunity #Issaquah #PNWEvents #MakersGonnaMake #3DPrintingCommunity #Meetup #CreativeCommunity
Heri_3d
dxzdb
Matt Evans 
MakerDeck
